saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 1/7 features rf bandpass filter high attenuation usable bandwidth 10 mhz no matching 50 w single-ended operation ceramic surface mounted device package ( 3.8 mm 3.8 mm ) rohs compliant package dimensions 3.800.15 3.800.15 1.400.15 1.270.10 1.000.15 1.500.10 0.600.10 1.000.10 1 23 7 65 1 23 65 4 7 8 4 8 dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameters unit minimum typical maximum operating temperature range 10 25 50 storage temperature range -20 25 85 power handling capability dbm 5 electrostatics sensitive device ( esd ) pin configurations 2 input 6 output 1, 3, 4, 5, 7, 8 case ground itf 7631
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 2/7 specifications fc = 763.0 mhz notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements were measured from 0 db (reference level) minimum typical maximum unit center frequency ( fc ) - 763.0 - mhz insertion loss (in fc +/- 5.0 mhz) - 1.3 3.0 db amplitude ripple (in fc +/- 5.0 mhz) - 0.3 1.5 db vswr (in fc +/- 5.0 mhz) - 1.5 2.0 attenuation (reference level from 0 db) 10 mhz ~ 708.0 mhz 788.0 mhz ~ 798.0 mhz 873.0 mhz ~ 973.0 mhz 1200.0 mhz ~ 2000.0 mhz 30 52 40 25 41 61 43 45 - - - - db input / output impedance 50 ohms
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout a nd parasitics ) marking configuration itf 1) 7602 2) 1) manufacturer name 2) marking number * ink or laser marking available
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 4/7 typical performance ( at 25 )
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 6/7 packing specification 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pcs / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F7631 part no. F7631 rev. date 2011-11-01 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. ncmk01-as01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 4.30 0.1 b 4.30 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
